ENSITU 7000 O2 - Transmitter Probe

Information

Decades of experience in design and construction of highest quality analyzers have resulted in the ENSITU® 7000, a budget friendly O2 transmitter probe, made by ENOTEC.

Being able to withstand high flue gas temperatures up to 600°C and high dust loads, the ENSITU® 7000 allows a fast and continuous measurement.

Highly versatile and robust, the new ENOTEC analyzer is the ideal solution for process control in small to medium sized boilers, using all applicable fuels such as gas, oil and coal.

The ENSITU® 7000 works out of the box, needing no calibration or instrument air supply. ENSITU® 7000 measures InSitu: diffusion takes place through the large filter with v-shield. Flue gas extraction and conditioning is not necessary.

Installation takes a matter of minutes: Install using an industry standard flange, power up and measure. Available in 3 lengths, the ENSITU® 7000 is designed for easy integration in existing boiler concepts.

Technical Data

Measuring principle

Zirconium dioxide, InSitu

Insertion depth of probe

313 mm
536 mm
993 mm

Reaction time

< 1 sec. (on test gas)

Probe material

1.4571 (316 Ti)

Measurement accuracy

< 0.5 % of measured value or
0.02 Vol % O₂
(higher value valid)

Process gas pressure

950 – 1.050 mbar

Process gas temperature

max. 600 °C

Flange connection

corresponds to DN65 PN6

Power supply voltage

48 VDC, 5A max.

Ambient temperature

-40 °C to 70 °C

Interface

4 - 20 mA, ENOTEC REMOTE

IP code

IP 66 / NEMA 4X