Oxygen Analyser OXITEC® 5000 |
||||||||||||||||||||||||||||||||||||
|
|
.jpg)
|
Innovative Electronic Analysis Technology designed for Maximum Accuracy of Measurement with Simple Operator Interface
Unrivalled Range of Functions:
Accuracy of measurement:
deviation of only 0.2% from measured value
Fully automatic calibration
Storage of measured
values
Freely adjustable output
attenuation
Electronically monitored pneumatic unit for reference
air and calibration gas
Two freely adjustable measuring ranges
Double limit monitoring
Self-regulating
Intuitive operation
via soft keys
Status display with on-line help
Display capable of graphics
with
Digital display
Plain-text display
Bar-graph-display
Technical Data:
| Dimensions:: | see dimension drawings |
| Mains voltage: | 230 V/50 to 60 Hz tolerance +/-10% 115 V/50 to 60 Hz tolerance +/- 10% |
| Power consumption: | 400 VA during heating up 100-200 VA during operation |
| Series fuse recommended: | 10 A |
| Ambient temperature: | -20 °C to +55 °C other temperatures on request |
| Immunity from disturbance: | nach EMVG und Niederspannungsrichtlinie 72/73 EWG EN 50081-2: July 1993 EN 50082-2: March 1995 |
| Relay outputs: floating: | 230 V~ 5 A resistive load |
| Analogue input of the cell:: | Re: >9 MOhm Ue: -4,5mV to +265 mV |
| Resolution of A/D converter in the active measuring range: |
14 Bit + sign |
| Analogue input of thermocouple: | Re: >900 kOhm |
| Temperature compensation: | electronic |
| Signal output 0/4 to 20 mA: | burde max. 500 ohm, potential-free |
| Response time of mA output: | < 200 ms |
| Display: | LCD, LED-illuminates, 240 x 64 points, graphic display |
| Interfaces: | RS 232, RS 485, bus compatible |
| Accuracy: | +/-0,2% from the measured value |
Download Area
You can download following files as PDF Files
|
Download OXITEC 5000 Handbook (PDF) (approx. 2,3 MB) Download
OXITEC 5000 Product Flyer (PDF) |
|
